Recent content by thesleepy_slee

I think my settings are correct, but an extra check won't hurt. I have a single VTO, IP .50, and 2 VTH (.51 & .52) VTO SIP port is set to 5060 on the config page, however show-up at 5061 on second image. Not sure this is normal. I configured everything using Dahua Tools, and not thru the devices...

@Holbs thanks for the info. Not sure if I have a -S2 or not though, and they seem to run different firmwares. I have an issue with the VTO, when I press the ring button, it calls the VTH but not possible to see the video feed, only black screen. I can see it perfectly when doing it manually...

The switch is powered with POE+ (60W ubiquiti power supply), and only 2 cams connected to it. I've used this switch with 2 cams for a while, just replaced an existing cam (5431) with this new cam.

Hello, I bought this cam in November: T54IR-AS-S3 It is frequently not responding to ping (checked with Uptime Kuma) Using factory firmware: V3.100.0000000.5.R Is this a frequent issue? I don't have this issue with other cams. Powered thru POE, using Ubiquiti Flex switch. thanks

Hello I have the same issue, but on a DAHUA 5431E cam. Setting the flip to 270° for both night & day & normal profiles. Setting profiles changing to Auto (because I had a CGI script before, and did not want it to mess with the flip). Camera info & FW as below (never updated it System...

@Holbs : 4.) Sadly, did not fix the main stream 720p / substream 1080p issue. Maybe this was by design? => what is your issue exactly? Main is 720p for bandwidth reasons. It's by design.

Using dahua2mqtt in docker as mentioned on first page to trigger events.

@looney2ns not sure if you are still using the doorbell, but just found out that you can define the video codec thru dahua config tool. second stream was set to H264B. I have set it to H264H, may see better video performance now. Facing some issues with ONVIF: only admin account works. Other...

For those who are using this doorbell, I am powering using PoE. Is it possible to use NO/NC door contacts? I am trying to use NO by connecting NO & COM but nothing happens when I try to open the door thru the VTO/VTH. Also facing some issues with reverse proxy. Can login locally using gDMSS but...

Hi, sorry this may have been asked already, but when I set my cameras to H265, can't seem to get UI3 show video stream again. Ideally, UI3 would stream H265 directly, but I think I read it is re-encoding the sreams. Any configuration can be set to direct stream instead of re-encode? I cannot...

Answer is on first page: seems no

Try with another google account. Tried with 2 without success.

How do they get data from VTO if VTO is 12V DC powered? @looney2ns : your picasa links no longer work.

Hi, When you power the outside unit with 12V DC, how do you connect the inside screen? Is it the inside screen which has to power the outside unit? If I connect the outside unit with 12V DC, can I use 2 inside screens? thanks

@mech could you show the "record" settings of camera you use for timelapse? thanks