Recent content by tmxv4128

Though most of my cameras are a mix of 4K-T, 4K-X, 4K-T180, 5442T-ZE, and T5442TM-AS, I still use five N55DU82 around the house as a deterrent. I always test new firmware out on a spare camera before updating the others, and so today I uploaded newest firmware for this camera: 2.840.0000000.27.R...

Nice work Looney. What is the distance from the mounted camera to the street?

I agree with what Looney suggested. Set up a test rig that you can move around. Looks like daytime shadows may be a nightmare in the suggested placements.

You could probably use it on a smaller diameter pole than 3" if you purchased some smaller straps. That's what I did with the PFA-152. Straps are inexpensive at Lowe's.

The product description shows: 3.15”-5.91”

The audio setting that has worked best for me is AAC encoding at 64000 sampling rate. Also, I leave the noise filter "off" and made a foam windscreen to place over the mic on the camera. I took some old microphone windscreens, cut them up and attached them to all of my cameras with Command strips.

I have found the compression artifacts to be less when using H.264H with this camera. I tried both H.264 and H.264H, and could see a noticeable difference in the image.

Here are the settings I have been using. (street illuminated by one streetlight---camera illumination turned off)

Oops, the link above is for the receiver only. Here is the link for both transmitter and receiver...

Look about five or six posts above and you will see the link i posted for the transmitter and receiver I purchased. I had tried others before this particular model, and none worked reliably until I found this one. I’ve never lost a signal or had to reset anything since I have been using it.

I find it easy to click one button on a tv remote, and the picture will come up instantly on any of the four tv's in my house. As I am typing this to you, I clicked on the tv in my living room, and it took only a couple seconds to show this image of my cameras. Also, wired is always going to be...

I would definitely attach a camera to a temporary mount that could be moved around to test the area. Looks like there is going to be a problem with shadows and highlights in that placement. You need to see what it will look like in the day and night before committing to a final location.

Setting the resolution for 4096x1216 works really well for me. Also, I leave WDR "off." Having it turned "on" shows the center where the view of the two lenses meet.

BootCamp will work great on an older MacBook with Windows 10. You will be able to access everything with Internet Explorer. One note: SmartPSS is awful on the older MacBook. SmartPSS only runs reliably on the newer M1/M2 chip Macs.

On my MacMini running Sonoma 14.1.2, Safari was working great with the WEB 5.0 interface, until the most recent update from Apple. I had to switch over to Google Chrome Version 120.0.6099.109 to gain full access again. For any of my older cameras not running WEB 5.0, I have to either run...